Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RADILON DT 40E50USR 333C BK - PA612 - RadiciGroup High Performance Polymers

Material Data Center offers the following functions for RADILON DT 40E50USR 333C BK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Radilon D datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
PA612 semi-rigid, high viscosity extrusion grade. Toughened. Improved resistance to uric acid solutions. Black colour.

Suitable for extrusion of profiles, tubes and pipes. Material especially developed for automotive under the hood applications, employed in selective catalytic reductions (SCR) systems.
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus 920 / - MPa ISO 527
Yield stress 30 / - MPa ISO 527
Yield strain 25 / - % ISO 527
Charpy notched impact strength, +23°C 85 / - kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 68 / - kJ/m² ISO 179/1eA
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 212 / * °C ISO 11357-1/-3
Electrical propertiesdry / condUnitTest Standard
ISO Data
Volume resistivity 1E13 / 1E11 Ohm*m IEC 62631-3-1
Surface resistivity * / 1E10 Ohm IEC 62631-3-2
Other propertiesdry / condUnitTest Standard
Water absorption 2 / * % Sim. to ISO 62
Humidity absorption 0.8 / * % Sim. to ISO 62
Density 1010 / - kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.1 % -
Melt temperature ≤275 °C -
Characteristics
Processing
Injection Molding, Pipe/Tube Extrusion, Profile Extrusion
Delivery form
Granules, Black
Special Characteristics
Heat stabilized or stable to heat
Chemical Resistance
Acid Resistance
Applications
Automotive
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Other text information
Injection molding
The material is delivered in moisture-proof packaging ready for processing. Maximum recommended water content for best processing is 0.10%. Typical conditions with a desiccant drier: temperature 80 ° C, dew point -20 ° C or below, time 2-4 h or more. Avoid excessive shear rates and high thermal stresses for better processing. Special care must be taken to avoid moisture absorption and contamination with other polymers when adding regrind material. Colour variation and mechanical properties reduction may occur and should always be carefully monitored.

Injection Molding Processing Parameters:
Melt Temperature Mold Temperature Injection Speed
230 - 260°C 70 - 80°C medium

Extrusion Processing Parameters:
Rear Center Rear   Center Front   Front Head and Die   Melt Temp
220°C 250°C 260°C 270°C 275 - 280°C 275°C
428°F 482°F 500°F 518°F 527 - 536°F 527°F
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.